Geekcreit Power Supply Module
RD6006/RD6006-W LED Switching Power Supply S-400W-48V/DC12V/24V/36V/60V 8.3A-33.3A Support Monitoring Transformer Lighting
Questions and Answers
hi i need to use more than only one voltage output. can you provide the power supply with all 12/24/36vdc please? i have 2 fans one is 12v dc and the other one is 36vdc. can i connect them both to your power supply and will be k? thanks
You can connect these fans, there are 2 options 1, Both 12V and 36V fans using a resistor in series for each fan, you need to calculate the series resistance and power value of these resistors, take a look on the fan labels in order to drop down the voltage to each fan. 2. Or you have to buy 2 step down small power converters and adjust the outputs for 12v and 36v, then you can install the fans.
does it come with installation manual as complete kit? with box and controler?
When the order is complete but then the supplier separates the order into two packages and sends it at two different times. I just got the source now and there's no further instructions inside. The shell and the controller are in process of delivering
Reviews
jeever
on 23 September 2021
The internal looks neat and tidy. On the left you see the mains filter and next to it the rectifier of the mains voltage with two large smoothing capacitors. The electronics are still very traditionally built with axial components on a single-sided PCB with wire bridges. You will search without success for SMD components. Notice that isolation slots are milled into the PCB in many places. The heavier components are fixed with sealant. All in all, this power supply makes a reliable impression. We could not resist performing a few tests on this power supply. Our specimen produced a voltage of 65.263 V without load. Loaded with a current of 5.5 A, the voltage drops to 65.134 V. The voltage drop is thus 129 mV. This corresponds to an output stability of 0.20 %. The figure below compares the hum and noise at no-load (left) and full-load (right). The peak-to-peak value of the noise and ripple at full load is therefore 250 mV.
DMITRY
on 16 March 2021
Quality power supply. Purchased it as an AC-DC source for the DC-DC RD6006 adjustable module. Delivered goods in 20 days. The power supply has an output voltage adjustment (66V to 56V).
isvalj
on 19 January 2021
fast delivery, damaged case i need to test it to see if it works ok
BG501021373
on 22 December 2020
All super, no visible damage. Whether it works is still extensively tested. 👍
Long Vu
on 01 November 2020
great
Arjee
on 07 October 2020
Took some time to arrive. Transporter places heavy load on top of package, bump in aluminum top cover of power supply. Also have dropped it on a corner and some other bumps. Power supply is working okay.
pzg2908
on 08 May 2020
Fast delivery and a great power pack!
heavyd
on 15 February 2020
Very fast delivery, excellent power supply. (ver. 60V, 6.6A) The only complaint: maybe better packaging, better protection. As the pictures show damage from transport on the case, but the device works fine. Recommend
Lukáš Konečný
on 12 February 2020
Super source, surprised it is so small, recommend buy
alcoa
on 18 December 2019
Spedizione veloce, imballaggio sufficiente, alimentatore ok buona qualità.
