Electronic Accessories & Supplies
50pcs LED RGB Common Cathode 4-Pin F5 5MM Diode
Questions and Answers
What is the voltage of this led ?
Run your multimeter from a color pin to ground pin individually on diode mode to get accurate minimum voltage per led
I'm looking for frosted RGB LEDs 5mm common cathode, do you sell them too?
You can actually sand the led to make it look defused
Reviews
Nperez39
on 11 September 2021
arrived early, decent package all pieces there, blue uses 2.4v red at 1.7v green at 2.2 all anodes at recommending voltages, good buy!
dimitris1965
on 14 January 2021
Everything is OK
sael00
on 16 March 2020
All colors;)
Firo11
on 05 September 2019
50 x Cathode 4-PINS F5 5mm RGB LED Light. 20mA, !!! for RED not 3V > ~ 2V !!! OK shipping, product. Good thing, without the necessary detailed information. 50 katódových RGB LED diód. Uvádzané napätie 3V je pre iné farby, pre červenú LED cca 2V !!! Dobrá vec, ale bez potrebných podrobných informácií.
noor
on 30 April 2019
It's good and worth the experience You can use it in many distinctive projects You can watch the attached video to learn about its brilliance and how it works
BG483254134
on 07 December 2018
Very nice transparent LED its glow and shine are quite impressive
Prashant
on 25 May 2018
Good quality but don't apply voltage more than 3V. I applied 3.7 V and it results in malfunctioning of red light. So please use 3V only . And the led will work fine.
Max Klaxx
on 23 February 2018
Good quality and high brightness. But be careful, the voltage of 3 volts cannot be applied to the red color and would destroy the LED! My self determined voltages for about 20 mA are as follows: Red: 2.2 V Green: 3.0 V Blue: 3.1 V It is best to use a suitable series resistor for each colour.
Mazhar
on 20 February 2018
Good Product. Thanks.
JorgeLon
on 05 November 2017
Leds are very good for doing projects with arduino and similar boards. Long led is ground.
