ZOHD RC Airplane
ZOHD Dart250G 570mm Wingspan Sub-250 grams Sweep Forward Wing AIO EPP FPV RC Airplane PNP KIT
Questions and Answers
what receiver do you buy for Taranis qx7 and does it have to be set up on bata flight and what battery 3S with a Xt 30 or Xt60 connector
Your information is incorrect "xiaohui" - please edit to correct it. The supplied connector (for the FPV version with the Kopilot flight control and GPS and the PNP version without Kopilot) is XT30 and the Kopilot only accepts PWM or S-bus receiver inputs.
Novice to FPV. What is a good radio system to use with this?
Fly sky i6 or i10 ought to do it for a first timer. you can get the shiny stuff once you're comfortable with the programming&flying basics, how to set up osd telemetry, etc.
Reviews
BG451144150
on 09 August 2021
It's all right, but for a beginner, it's not a good fit. I took it as the first wing, before I flew in quads. Cons: 1. There's very little room inside for mounting. 2. A very fragile hull, I smashed it on fourth down. When buying, order glue right away. 3. Small wings and hence a small lifting force. I bought the cheap 18650s, and they don't give much power, so the model doesn't pick up altitude. If you're a beginner, look at the sonic model wings, they're more expensive by a couple of thousand but the silence of these flaws. Personally, when I smash it in the chips, I'll buy an airwink.
Kostya
on 06 February 2021
The box's a little tight, but it's all here. Twisted in his hands - the quality very much liked. Not yet flown, checked on the table, serves run the motor spinning smoothly and gently. I paid attention that now there is no spacer (which is between the magnets that hold the lid), perhaps it is some update and now the spacer is pasted into фюзеляж, I do not know better or worse for stiffness, but assembly and access to components clearly must be more comfortable. Assembly and configuration ahead:) The box crumpled a little, but everything came whole. I liked the quality very much. I haven't flown yet, I checked it on the table, the servos are working, the motor spins smoothly and gently. I noticed that now there is no spacer(which is between the magnets that hold the lid), perhaps this is some kind of update and now the spacer is glued into the fuselage, I don't know if it's better or worse for rigidity, but assembly and access to components should clearly be more comfortable. Assembly and configuration ahead:)
Emrmatthias
on 07 August 2020
Very good quality definitely recommended. The body of the wing is made of sturdy polystyrene. The engine is well attached and makes a solid impression. The magnets to secure the cover sit well in the styrofoam. The wings are plugged into the fuselage and are held by two adhesive strips and a carbon rod. In the. PNP version. the styrofoam is a motor and ESC Xt 30 connector. in the kit version only the styrofoam is available. Recommended by me. ps: This is not a fake review
Nera87
on 27 July 2020
Excellent Complete plane with stabilized system Kopilot, Fpv and Gps with return home function! Recommended!!! Full review on YouTube: Nera87 Instagram: Nera87_Reviews
13day
on 01 June 2020
recommended
Thurinven
on 02 December 2019
Great little model. If you think it’s small, you will still be surprised - it’s even smaller! Comes in a nice, sturdy box, very safe shipping. I’ll use it with my Matek F411 Wing flight controller. Build quality is very nice, and comes with a lot of extras - stickers, leaflets and cute laser cut wooden version of ZOHD 250G
areyouroo
on 26 November 2019
отличное крыло, хоть и кажется что дороговато за такой размер, брать только кит или пнп версию, 411 wse полетник и 180 гпс модуль
bonafidepirate
on 13 November 2019
Such a great little plane, I didn't really know what to expect from something so small and light, but it actually handles great! I built mine up with a Matek F411-WSE and put iNav on it. It's amaing how much this technology is advancing allowing so much functionality from small gear like this!
satsepp
on 10 November 2019
flys verry well: https://vimeo.com/372218378 Sepp
FlyHardFpv
on 01 November 2019
came in a nice sturdy box nicely packed no damage at all, very light small aircraft I can’t wait to put my electronics in very well made.
