SONOFF Smart Sockets Switches
SONOFF ZB Dongle-E USB Dongle Wireless Zigbee3.0 Bridge Gateway Smart Home Interface Capture With Antenna Gateway Analyzer Base On TI EFR32MG21
Questions and Answers
Good for Kali Linux?
yes
Is this the modell ZBdongle-P, because the descxription is not clearly and at the end there is some wording like Dongle E
the model is ZBdongle-E
Reviews
Philippe91700
on 24 February 2025
Compliant product, it is indeed the ZBDongle-E version with the Silicon Labs EFR32MG21 chip. Version 6 must be updated to version 7.4 or even 8.
msgouros
on 07 February 2025
Received it and updated it to latest (7.4.4) firmware from SONOFF github. Working flawlessly with ZHA and Home Assistant v.2025.1.4. Not using it as Zigbee2MQTT but it is surely supported if you are going to use like that. So far only zigbee tuya devices are connected to SONOFF dongle and there are working as expected.
dominiquegueneau
on 06 January 2024
Conforme aux attentes, pas encore installé, mais ça ne va pas tarder
BG183800537
on 27 November 2023
Product arrived in good shape, undamaged. Will soon test it on my Home Assistant server.
mdc10.50
on 26 May 2023
Nice ZigBee dongle. Used it to replace ConBee2 on HomeAssistant Zigbee2MQTT running in a HAOS VM config on Debian11 on an Intel Nuc7. Google YouTube “ Smart Home Junky” 4 details why. ZigBee operates in the same band as 2,4GHz WIFI so to increase range I replaced the standard included (poor performance) antenna with a better old WiFi router antenna.
szittya
on 11 December 2022
Super
schilea
on 09 June 2022
Bought it as backup for the one with zigbee2mqtt already installed in Home Assistant. Worked like charm just by changing the path in configuration, but some devices need to be paired again, not by deleting them but activating permit join and put them in pairing state.
djearthquake
on 02 June 2022
Exactly as advertised. seems like a good product, and was delivered quite fast.
ionize
on 16 March 2022
This new dongle is a great improvement over the previous generation of zigbee 2.0 dongles based on CC2531 chipset. Also the aluminum casing is a big step forward.
yezzer
on 14 March 2022
Perfect working zigbee 3.0 usb dongle. You should use that with a usb extension cable instead of sticking it directly on an RPI usb port: then the system will perform even better because of less interference.
