Sonic modell RC Airplane
Sonicmodell Baby AR Wing Pro 682mm Wingspan EPP FPV Flying Wing RC Airplane KIT/PNP
Questions and Answers
Do you need a fc, flight controller?
no
What is motor shaft diameter for Baby AR Wing Pro.
5mm
Reviews
BG101536215
on 29 April 2025
Fast delivery to Poland. _Very good package, safe for transport._Everything included as declared, all parts fit one to another. Waiting for first flight.
jakubpajerski
on 23 August 2024
This is a damn masterpiece. With LiIon 3S 3200 mAh battery flies for over 40 minutes. Remember to set the CG precisely and leave the rest to flight controller. Can't recommend enough, only con - no spare parts.
dbrain78
on 08 March 2024
This is a good wing with lots of room in the battery bay. A 3s 2000mah is a very snug fit but will fly for a long time on it. You will need to put a bit of weight in the nose to get the CG right. Since it is a smaller wing it does seem to be very bumpy in flight. Ive tried everything I can to get it stabilized but it remains very bumpy. The foam is decent quality. A few rough landings and the front is starting to split and both wings have pulled the balsa locks out. Since buying mine Ive put digital mextal gear servos in, replaced the foam hinges with plastic, taped the hinges, and upgraded the motor. Im using a matek f405 flight controller, tbs crossfire nano, walksnail nano v3, and flyfish gps.
BG165284716
on 23 December 2023
the airplane ' s clearly made of plastic , very good , and the propeller ' s solid
BG511444221
on 27 October 2023
forever top shelfer meaning amazing.
tornado66
on 07 September 2023
Sonicmodell Baby AR Wing Pro is the baby version from Sonicmodell Wing Pro good to fly and you can use FPV Walksnail camera to fly digital.
Sacdong
on 18 July 2023
Good wing for long flight
Sacdong
on 17 July 2023
This is good wing for long range flight.
elyfranco
on 06 July 2023
Great model, will fly soon
Hobbyboy
on 21 June 2023
After watching tracking for a few days. I got fed up because the package stopped moving, or should I say the tracking did. Needless to say, it's a pain that tracking doesn't follow the package all the way. So let me say this, it's cute! Nice size little wing, and I'm hoping performance exceeds its sleek look. Assembly is straightforward, and soldering is easy when you have a huge bay like this to work with. Remember to make everything easily disconnectable from the fc if you use one. It's small enough that you don't need one. The only glue I used were on the winglets, and it would be nice if they too were removable. I like the channels molded in the wing halves. Makes running cable and servo leads a "Snap! So far, this wing hasn't missed a beat. Has everything you need for good separation of the vtx with the pockets out on the wing. a hole for passing the antenna through would have been nice, but I'm not complaining at all. If you have all your parts, you can be up in the air in a few hours. Seriously, it's a breeze to get everything in and set up. Other than not having a place for the gps, I like it a lot! The only real head scratcher I could find was Elevon's. You will notice a gap that shouldn't be! Every other SonicModels plane has a molded in hinge line, no gaps. This little guy does, and I'm hoping some black packaging tape will work, as the elevon LE isn't beveled. That's it, nothing more I can say until I have maiden it successfully.
