MACHIFIT Linear Actuator
Machifit ER11 Chuck CNC 500W Spindle Motor with 52mm Clamps and Power Supply Speed Governor
Questions and Answers
Can this be used in the uk? The nominal voltage here is 230v
yes the power supply is configured for 230v
What accesories can I buy to use 3 to 12mm worktools on this chuck?
Good, a group is doing a CNC and we would like to know if you could fix us a little bit the price, thank you.
Reviews
iwilson111
on 04 July 2021
Arrived on time, well packaged and in good condition. I have the brushless equivalent of this spindle motor and purchased this one for a different project to keep cost down and was surprised that it was slightly quieter than the brushless one. It does run quite hot though which I guess is to be expected. I haven't used it to properly to cut anything out yet but it does function as supposed to. It doesn't come with an on/off switch, but can be stopped by reducing the speed with the controller. I intend controlling the on/off state via relay like I have with my brushless one which is something I can recommend to people. Overall very happy with the purchase and for the price I don't think you would find anything to match.
BG440345181
on 20 March 2021
its very strong and powerfull motor.if you want to cut something fast you should buy it. 1 haftada geldi tavsiye ederim.gümrük falan ödemedim.direct mail ile.
19josh98creator
on 26 December 2020
Bought this to cut aluminium on my 3018 pro. I have a couple of issues to start with: the motor wires need to be lengthened for this to adequately move on the machine. simple enough to do with a couple of barrel connectors, but just be aware. The second is the fan on the top of the motor. its verticle fins only really disrupt the air and do not keep the motor cool enough. i have designed and printed a propper cooling fan which keeps the motor temp down, as it can get quite hot. the final thing to moan about is the power box. there is no safety switch, once plugged in the system is live so make sure the speed control is at zero or the motor is no where near anything. its easy enough to add one, and you can even use a relay to switch it on and off from the original board. so onto the good bits. the motor is easy enough to setup, the aluminium block i recommend you use, as it acts as a heat sink for the motor. you will have to print a new carriage for it though. for the 3018 pro machine, the motor doesnt put too much strain on the x axis, but for greater depths and speed, i recommend adding an additional rail to reduce flex. the motor is actually quieter than the original motor, and will allow you to mill aluminium, and it may do steel at a really low feedrate. i am still experimenting with speeds and feeds, but all in all a really good kit to upgrade the basic 3018 bench mills!
BG461681537
on 07 September 2020
Packaging received in very short time here in brazil, very well packaged and protected, order well traced by banggood and the mail. Works really well, I would recommend this product, solid foundation ideal for use on cnc machines and with measurements to mount up to a 20x80 aluminum profile. Any questions can ask in Portuguese, English or Spanish. Package received in a very short time here in brazil, very well packaged and protected, order well tracked by banggood and by the post. It works very well, i would recommend this product, solid foundation ideal for use in cnc machines and with measures to mount up to an aluminum profile 20x80. Any doubt can ask, in Portuguese, English or spanish. Paquete recibido en muy corto tiempo aca en brasil, muy bien packed and protected, commienda bien tracked by banggood y por los coros. Works muy bien, would recommend this product, solid foundation ideal to use in machines cnc and con measurements to mount hasta in a 20x80 aluminium profile. Cualquier duda pueden ask, in portugues, English the spanol.
BG483848692
on 03 August 2020
Received as described. Tested, and it's working. Not assembled yet. I made a model of the bracket with measurements as precise as I could. Screws are M6. https://www.thingiverse.com/thing:4560615
TheMadMaker
on 14 July 2020
Absolutely love this! I made a video where I use one to turn a 3D printer into a CNC and it kinda works well! I've cut wood, plastic, aluminium, linoeum so far. https://youtu.be/52GsS5nopCY The only fault I would say is the Chinese writing on the PSU so you need to take care when wiring it up.
Arek00
on 30 August 2019
item as described
TinelArmasu
on 14 May 2019
everything's okay very fast
apoorvazaveri
on 01 August 2017
Excellent product with great price. Shipping was fast & received within 10 days. Packaging was not so good, bu the product is as described. In fact, the motor performance is very good. No noise. No vibration.
Alwyn
on 10 December 2016
Ek gebruik die "Spindle" nou al vir n geruime tyd en het geen probleme sover nie...hy loop baie sag en het baie krag selfs op lae revolusies...ek kan nou in verskillende plastiek sny sonder dat dit smelt..het met hom ook aluminium gesny...werk goed
