HONGDUI Router Table Plate
HONGDUI Woodworking Assembly Table Saw Clear Cut Press Stock Push Guide Table Saw Cutting Pushing Guide
Questions and Answers
Are the wheels that rest against the workpiece spring loaded, like the Jessem's.
There's spring on the fixed lever of Knob but not in the wheels.
Can they be moved out of way if needed?
Yessir. both arms can be rotated so they point skyward. This removes the only impediment and they can be slid toward the non-blad-side of your fence. In the case of my Delta, when so repositioned, they are about an eighth behind the face of the fence, allowing tall items to slide unobstructed. If you're attempting to use something like a sliding sled or jig that hooks OVER the fence, both arm roller assemblies can be slid entirely off of the fence as well, allowing you to leave the tracks they run on in place while still removing the obstructions to movement. Genuinely: I use these daily. And while I'd never suggest them as a replacement or surrogate for a riving knife, I admit I DO use them occasionally as such. Won't stop your stock from binding with the release of tension, but DOES prevent the kickback.
I have a Stanley SST1801 table saw, the fence has a track slot, can this fit the Hongdui roller arms directly without using the supplied Hongdui tracks?
yes
Reviews
Marmouset
on 30 November 2023
livraison plus rapide que prévu. bravos
BG254718244
on 29 November 2023
Over $120.00 less than JessEm Clear-Cut TS Guides I purchased for my powermatic saw with the same quality. Have been very pleased with HONGDUI products that I have receive, so ordered these for my fathers new Harvey saw the work fantastic.
BG312334410
on 24 November 2023
real good product
patax
on 22 November 2023
high quality product. works well and increases safety on the table saw
BG171019511
on 16 October 2023
Fantastic product, excellent quality as all the products that I have bought from Hongdui
BG531117172
on 10 August 2023
Outstanding quality. I do feel somewhat guilty as Jessum did all the heavy lifting on this product and this is a total copy. That said, 120 bucks cheaper is a lot of money. There is no compromise I can see. Other than the track being 2 pieces as opposed to 1 to facilitate easier shipping. A couple of people complained about scratches from shipping. It appears the knerled cap screws on the end of the pivot shafts rub up against the aluminum housing creating a very small scratch. I was able to "remove" the minor cosmetic blemish with a black Sharpy. Either way it has no effect on performance.
BG011205117
on 10 March 2023
very fast delivery, did not test it as i just got it. feels very well build and engineered, packaging can be inproveed as it turned with some scratches as can be seen in pictures. is an yes, go for it
BG131121715
on 10 March 2023
Item as described. Prompt delivery to Australia (< 2 weeks) Supplied with 12 machine screws and 10 wood screws for fixing. Can confirm rollers are one-way, turn freely the other way and are inclined to fence as expected. Machining seem good. Very pleased. Minor quibble - the large fixing screws for one assembly had become loose in transit but no visible damage.
BG181044124
on 10 February 2023
very fast delivery good packaging good quality tools
BG331838182
on 14 May 2022
The product was damaged and had a manufacturing defect when I received it. The anodizing on the rails was damaged and one of the arm supports is pitted, see the photos. This is very disappointing for me as I have have ordered from Bangood previously and this is the only time I have been unhappy with the goods
BG445255455
on 17 January 2022
great product, love it
BG197431410
on 19 September 2021
It is a nice product, well packaged. I atteched it to my Bosch GTS 635-216 table saw. I extended the fence by 15 mm plywood and I used just one provided rail because of the length of the original fence.
