ENJOYWOOD Pocket Hole Jig
ENJOYWOOD 3 in 1 Adjustable Woodworking Doweling Jig Kit Pocket Hole Jig Drilling Guide Locator For Furniture Connecting Hole Puncher Tools
Questions and Answers
which depot has promo code now?
can I use this to make dog holes in my workbench?
no, you can't make dog holes
Reviews
BG101950565
on 15 September 2024
Quality product at a reasonable price.__The first order did not arrive, but they refunded the money. The second one arrived. The brass nut was missing, but the complaints department works flawlessly, they sent the part for free.__So far tested once, but I believe it will work well.__Great plastic case. Personally, I really like the stop that allows you to drill the same gaps repeatedly.__I recommend.
lenin972
on 31 May 2024
I must say I'm very impressed by the quality and functionality of this jig, even without taking into account its low price. As shown in the photos, it comes very well packed and protected, all the drill bits are sharp, and nothing is missing. One thing I will add to the jig is a 45-degree adapter that will allow miter doweling too (I'm thinking of a piece of wood that will be held in place by a bolt going through the 15mm Forstner bit guide hole. I still don't have a good solution for clamping tough, but I'll figure it out, maybe another 45-degree piece of wood to align the clamps), hopefully ENJOYWOOD can come up with an aluminum part that will make this super versatile jig even more versatile (I would definitely consider buying it).
BG241611317
on 05 May 2024
It has a nice red anodized finish with brass knob accents. The package it arrived in had some hemming. I purchased it with a case, so there were no problems with the case in the box. However, there were drill bits scattered all over the jig in the case and the jig anodize was scratched. The holes in the cam lock jig are incompatible with the included phosner bits. It seems to be manageable with lubrication spray. There seems to be a quality control issue.
ladyk
on 29 December 2023
product arrived in 2 days after ordering!Although I am from the country where you have a warehouse, it is fantastic!I just unpacked the product and already surprised me with its quality and workshop processing!I like Mooc and I am looking forward to it, When I try it out!The product can work with three diameters of cutouts,6,8,10 and has 5 holes in the base! which I like very much,plus a pull-out holder is included,which enables faster drilling.Also the drills are very sharpened,the drill is also included, I think the product is excellent, but I don't want to praise too much, I haven't worked with it yet!
BG497132511
on 05 August 2023
Delivery very fast. Everything corresponds to the store's description and product information. Haven't used it yet, can't comment.
Pandeleon
on 17 June 2022
amazing accessory that can easy to find a place in the workshop for DIY or for professional use. Robust construction with excellent finish. The package is simply unbreakable, everything you need to transport this tool without the slightest damage! I recommend 100%!
BG571044550
on 03 June 2022
Very good packing and very good material many thanks Drillpro and many thanks Benggood.
Masterplan
on 03 May 2022
Excellent. Great material, very versatile and impeccable precision. The only negative is the poor quality of the 3 prongs, while the Foster is not bad.
BigToe
on 31 March 2022
The jig arrived well packed in a cardboard box with no damage and with no parts missing. All parts are will made and have a feeling of real quality. It is well worth paying the small amount extra for the plastic storage case, which has the internal foam cut outs to accommodate all the various parts of the jig. There are a lot of small parts on initial delivery,, notably grub screws, and care is needed to ensure none inadvertently end up on the floor as finding them could be a mission. The Jig went together well in all configurations and I was impressed with its quality, Once it is disassembled to be replaced in the plastic box there are a number of small parts that would be easy to lose on opening closing. I remedied this by putting them in a couple of small plastic "pill bottles" and putting some tape around the three allen keys to keep them together. and there was still room left in the two storage compartments available for them. Once the jig has been used it is clear both how efficient easy and effective it is, although the lack of instructions is an issue I think should be addressed. However, doing a search on YouTube will get come excellent videos demonstrating the use. I can't remember the actual one, but there is a video which seems to come from Eastern Europe and is subtitled that demonstrates the use as it should be. Some of the others don't indicate all of the jigs facets properly and it is worth looking specifically for the video I've mentioned. All in all, this is an excellent jig and at the price it seems unbeatable to me.
BG111737201
on 30 October 2021
Box is pretty strong and well designed. After opening the box I found that the 2 bronze cross hatched nuts are missing. Other buyers reported similar problem. These nuts lock the main bush plate and the square fence with the 2 black protruding bolts. Further when trying assembling there are other 2 bolts missing which fix the main plate and the plate with the 2 big knobs. From my measurements these missing bolts should be M5 x10mm long. So until I replace these the jig can't be used. All plates are milled and cut perfectly square. They are 10mm thick and the fence plate has a small rebate to help with alignment. Drilling bushes are fixed in place with set screws M5 and they are beefy enough to last a long time. As can be seen in the photo they used 4 different hex wrench sizes 2.0, 2.5, 3.0 and 4.0mm. I would've preferred only 1 or 2 sizes. The 3 plates with 5 bushes are interchangeable and locked in place with 2 x M4 bolts fixed in stainless steel springs. The position rail seems a bit light but it should do the job. Rail bars are fixed in position with set screws. All 3 pins (6,8, 10 mm) are a bit loose which could create problems with alignment when referencing from a previous dowel hole. There are few small dents and scuffs on the plates. Considering also the missing parts I guess the assembly line is mising the quality control. For the price I expected a bit better quality.
