Eachine TX06 700TVL FOV 120 Degree 5.8Ghz 48CH 25mW Smart Audio Mini FPV Camera Support Pitmode AIO Transmitter For RC Drone Tiny Whoop
Questions and Answers
Where to watching
Fpv monitor, https://www.banggood.com/Eachine-D-moni5-5_8Ghz-72CH-5-Inch-800480-169-Mini-FPV-Monitor-DVR-Built-in-Battery-for-RC-Drone-Airplane-p-1541598.html?rmmds=search
I bought it. But what is the reason for over heat and current consumption 370 m.a?
Hi! It may be fine. VTXs in general produce a lot of heat. But tinier ones for the same transmitting power will be hoter. I've already ordered different models from other brands, and they also produce a tone of heat to, especialy when the drone isn't flying. Hope it can help :)
dCrypto666 on 06 May 2021
Product is heavier than describe (3.9g instead of 2.2g). Otherwise is still lightweight and still have good performances. To finish: Fast OST (Order Shipping Treatment) and FAST SA (Sending Abroad). Overall delivery time was more than decent. Thx,
BG575341411 on 16 March 2021
Good and light camera for tiny whoop build or making anything fpv. I broke my antenna after like 35~ crashes and ordered new ones. I don't need osd on this one so i cut off the wires and soldered video in and video out together, now its even lighter. Overall very good cheap camera for a price of 9$. And yeah, it has no wdr so you can't see for example what is happening outside if you're flying inside...
BG123183533 on 25 November 2020
The truth is not bad, the image quality is very good, for a camera this size and this price . I've tried it in the car and you have fun for a while. One point in its favor is that it includes the transmitter in very little space and very light. It is worthwhile to start getting started in the world of VET.
HVandmore on 04 October 2020
Perfekt for mounting on a little quad like the eachine e010 and get a cheap indoor fpv drone. Video is not the best but acceptable. Doesn't do very well in bright sunlight (overexposed). But if you consider the very low price it's a good item that I can recommend.
tc120279 on 24 July 2020
Fantastic AIO camera perfect for someone just starting with FPV. Beware though, unfortunately this happens quite a bit with all things FPV as there is no standardisation re fittings/plugs etc, that you need to replace the female plug on the power lead provided (Or make an adapter) this femail plug is 2.5 you need to fit a PH2.0 female plug to fit most 1S lipos. The phot's should be self explanatory. I have three of these so they can't be that bad!
Abdul777 on 23 June 2020
i like it , my cat hates it. the price is good . nice image quality for the price.
tfang15532 on 19 May 2020
I purchased a a large number of them for redundancy and have to say that they all work perfectly fine. Works perfectly. Just make sure they are all on different channels and you are set. They get quite hot while it is stationary but no problems. Should cool down if the vehicle is moving since the cool air will cool it down!
maseaua2113 on 08 January 2020
Good camera, small and light. Be careful of the power connector, mine was reversed, can be seen in images.
stefanrathmann on 30 August 2019
Good little Camera. If you want to use it seperately you can 3D print housings from thingiverse. You need to make a 1S Adapter for the eachine batteries depending on which ones you use. You can also trim off the excess cables to make it more compact. In that case you need to solder the top two connectors together to have a video signal like shown in the attached pictures below. Cheers and have fun. Stefan from Germany
dtsaerialart on 18 April 2019
Great camera for the price! It has Vin and Vout to set up with an FC that does OSD (like most all do now) and it also has Smart Audio! FYI if the Vin goes to the Vout of your FC and vica versa (at least on betaFPV's boards). The FOV is a bit smaller than the cam that comes on the Mobula7 or the UR65 but it has nice colors and works well. I don't mind the centered antenna but you may need to mod you mount or canopy. I always bend my antenna back at a 45 deg angle or so.