Drillpro Pocket Hole Jig
Drillpro 3 in 1 Adjustable Woodworking Doweling Jig Kit Pocket Hole Jig Drilling Guide Locator For Furniture Connecting Hole Puncher Tools
Questions and Answers
Can the extension-rod-index-pin device be positioned so the red plate is touching the edge of the jig, using the pin as an edge-stop? How are the rods secured so they do not slide?
The position rail pin plate has 2 set screws that are used to hold the pin plate in place on the rods. Additionally, the 3 drill hole position plates each have two tiny set screws (just off center) that can be tightened to hold the position rail rods in place in the jig. Yes, I believe you can set it up using the configuration you described.
What is the max clamping thickness?
can be sent for a lower value, for handling customs?
can not. I have received item to Italy without any problems to customs.
is it possible to set the jig for matching dowels at 90 degrees?
Thisjig is fantastic and will do anything you might require. The answer is YES
BG510108321 on 23 August 2022
Pandeleon on 17 June 2022
amazing accessory that can easy to find a place in the workshop for DIY or for professional use. Robust construction with excellent finish. The package is simply unbreakable, everything you need to transport this tool without the slightest damage! I recommend 100%!
BG571044550 on 03 June 2022
Very good packing and very good material many thanks Drillpro and many thanks Benggood.
Masterplan on 03 May 2022
Excellent. Great material, very versatile and impeccable precision. The only negative is the poor quality of the 3 prongs, while the Foster is not bad.
KlimM on 05 April 2022
Good quality from DRILLPRO, as always!
BigToe on 31 March 2022
The jig arrived well packed in a cardboard box with no damage and with no parts missing. All parts are will made and have a feeling of real quality. It is well worth paying the small amount extra for the plastic storage case, which has the internal foam cut outs to accommodate all the various parts of the jig. There are a lot of small parts on initial delivery,, notably grub screws, and care is needed to ensure none inadvertently end up on the floor as finding them could be a mission. The Jig went together well in all configurations and I was impressed with its quality, Once it is disassembled to be replaced in the plastic box there are a number of small parts that would be easy to lose on opening closing. I remedied this by putting them in a couple of small plastic "pill bottles" and putting some tape around the three allen keys to keep them together. and there was still room left in the two storage compartments available for them. Once the jig has been used it is clear both how efficient easy and effective it is, although the lack of instructions is an issue I think should be addressed. However, doing a search on YouTube will get come excellent videos demonstrating the use. I can't remember the actual one, but there is a video which seems to come from Eastern Europe and is subtitled that demonstrates the use as it should be. Some of the others don't indicate all of the jigs facets properly and it is worth looking specifically for the video I've mentioned. All in all, this is an excellent jig and at the price it seems unbeatable to me.
Heysenebeniste on 11 February 2022
produit d'excellente qualité ! colis soigne, aucun choc/coup/griffe. encore du très lourd venant de Drillpro <3
Palo on 15 January 2022
fast delivery, i am satisfied
Roman_Pol on 18 December 2021
Excellent product use it and loving it, very good quality!
BG111737201 on 30 October 2021
Box is pretty strong and well designed. After opening the box I found that the 2 bronze cross hatched nuts are missing. Other buyers reported similar problem. These nuts lock the main bush plate and the square fence with the 2 black protruding bolts. Further when trying assembling there are other 2 bolts missing which fix the main plate and the plate with the 2 big knobs. From my measurements these missing bolts should be M5 x10mm long. So until I replace these the jig can't be used. All plates are milled and cut perfectly square. They are 10mm thick and the fence plate has a small rebate to help with alignment. Drilling bushes are fixed in place with set screws M5 and they are beefy enough to last a long time. As can be seen in the photo they used 4 different hex wrench sizes 2.0, 2.5, 3.0 and 4.0mm. I would've preferred only 1 or 2 sizes. The 3 plates with 5 bushes are interchangeable and locked in place with 2 x M4 bolts fixed in stainless steel springs. The position rail seems a bit light but it should do the job. Rail bars are fixed in position with set screws. All 3 pins (6,8, 10 mm) are a bit loose which could create problems with alignment when referencing from a previous dowel hole. There are few small dents and scuffs on the plates. Considering also the missing parts I guess the assembly line is mising the quality control. For the price I expected a bit better quality.