BIGTREETECH 3D Printer Accessories
BIGTREETECH® BTT TFT35 V3.0 Touch Screen For SKR V1.4/SKR 2 VS MKSTFT35 Ender-3 3D Printer Parts
Questions and Answers
does this work with ender 5 pro
nota 100% sure to be honest,
Will this work with an Ender 3 Pro with a SKR MINI E3 V1.2.32 bit board ? Or do I need a special board for this touch screen to work ?
It will plug in, but you will have to Flash your choice of FW to it.
zibis on 18 May 2023
Quickly and efficiently not connected yet.
hawkt45 on 29 July 2021
This is the best upgrade,which I did on my Ender 3 Pro. Its so good,that I bought another one,to keep as a spare one. Github has the required updated firmware for this. Thank you Banggood.
Fabrizio on 16 March 2021
It arrived after about 3 months but there can stay these days for the rest it seems all ok I still have to try it
bolci on 21 January 2021
gobogalon on 17 December 2020
That's cool. Delivery only 30 days
Peregrin on 05 November 2020
The display is very nice. Works very nicely with the Mini E3 V2,0 board. The emulation mode is nice and the ability to easily switch to the touch screen by holding down the knob for 3 seconds is very useful. One thing to note is that the touch screen runs as a small computer feeding gcode to the mini , so if you want to print from the slot on the mini you need to be in emulation mode to view the files on the card. The touch screen interface can only access the files on the plug in USB stick or its own full size card. Some things are easier to do on the touch display like bed levelling and movement. Some stuff is easier to do in the emulated mode. so having easy access to both is really great. One thing that is not mentioned is it the built in terminal mode on the LCD which is really useful for sending gcode to do PID tuning and other stuff not easily available through the interface. Works well. Really like this and when I get a second printer will buy another one
seanshort2 on 21 October 2020
fitted but found screen locked up on the two icons option turned out to be screen to much tight fit against metal frame cured by putting some washers inbetween board and ender plate which lifts away from the angled mounting plate hope this helps you guys firmware ok also braun rate sometimes wrong listing printer not connected but happy with purchase
lroge on 07 August 2020
perfect as usual for this brand.
mikael panth on 17 July 2020
BG121315211 on 07 July 2020
Excellent price from Banggood and excellent product from Bigtreetech. Fitted to my Ender 3 pro which I upgraded to BTT SKR Mini E3 V2 mainboard. Really pleased with these two upgrades, a must for any Ender 3 in my opinion.
SilenTHunteR on 12 June 2020
Well packaged and in condition.. Just got to install it to make sure everything's okay 👌