Geekcreit Driver Module
AC 220V 60W-100W Ultrasonic Cleaner Power Driver Board With 2Pcs 50W 40KHZ Transducers
Questions and Answers
Can I put many boards in series for a bigger tank, or would they become un-synchronized? What is the limit for this setup?
Without synchronizing the boards, the performance will fluctuate greatly. There is hope that the circuits will synchronize over network - frequency... Circuit diagram would help.
What for are these two additional screw and at what position they should be before I glue them to the bottom of reservoir
This screw is meant to be TIG welded on to tank where the transducer is supposed to be glued on. So you first weld the screw to the tank then apply some glue to the transducer and then you screw it on to the onwelded screw thigthly flush to the tank's bottom.
Reviews
fabio60973
on 18 January 2022
package arrived very fast seller very recommended, it is the second one I buy, the first one arrived without connectors and related connecting wires. You have to pay attention to the polarity of the transducers, the one closest to the cone is the positive, moreover, you should disassemble the transistors 13009 and put some paste on the heatsinks, because it is totally missing. now I will try the second card as well and if it doesn't all work like the first one, I will update the review.
BG521863816
on 15 December 2021
A pictures says all
kkomiasty
on 28 November 2021
ok
Rustico .
on 14 October 2021
Damaged by the BRT courier
BG415535259
on 06 September 2021
Great pricing and fast shipping. The Box itself was ok but, due to insufficient packaging, the transducers damaged the fuse holder and capacitor on the board.
enarki
on 29 December 2020
ultrasonic driver + 2x transducer as described; PROS: looks OK, well packed, all items included, delivered within a few days by courier from CZ; CONS: there is no documentation like schematic or connnection diagram included so you have to guess or reverse engineer PCB
cor
on 03 October 2020
Received within 2 weeks in good condition. Equally mounted .Works Perfect!!!!! Thank you, Banggood.
chronocepter
on 19 October 2019
Produto chegou e está funcionando, foi instalado numa cuba de aço inoxidável com epoxi e fiação ficou a meu gosto. Creio que precise de resfriamento ativo pra ficar confortável se usado por mais de 5 minutos.
JanErik0047
on 23 March 2019
Good quality!
Erwin
on 28 September 2018
They look very nice, however I haven't tested them yet.
